TDS possesses a wide range of equipment. The main equipments are described below:

Flood Extractors Equipped with two/ three stage vacuum blowers and a submersible pump to remove 45 GPM of standing water Extractors Light wand and hand drag tools for carpets Squeegee wands for vinyl concrete and hard surface Blowers Circulate air to increase the rate of evaporation, ensures faster and complete drying Dehumidifiers Compact type to remove moisture from shelves, cupboards ,small affected areas etc. Large custom-built dehumidifiers capable of converting large buildings into drying chambers Restoration Inspection Tool Moisture Sensors , Moisture meters - penetrating and non- penetrating Thermo -Hygrometers Containerized Dying Systems These systems with close climate control devices dry books, files, collectibles, valuable antiques etc. to a very precise degree. Other General Hand tools and Safety Equipment A whole lot of hand tools and Safety equipment required by a restoration specialist to undertake his job professionally and safely.

Technology and Equipment

The primary method of humidity control employs Bry Air Desiccant based Dehumidifiers - DRYMAX SERIES

DryMax Senior Series with Fluted Bed (Rotor)

High Efficiency and Reliability:

• Totally self contained fully furnished industrial unit
• Robust structural caged steel frame and case construction
• CNC fabricated with industrial grade wet epoxy paint for weather protection. Well balanced unit with load equally distributed.
• High moisture removal efficiency with dual mode operation for high removal /Enersave operations.
• Unit exterior protected by rubber layer against rough handling.
• Both air intakes through 2 stage high dust holding capacity EU3 filters
• Suitable for outdoor operations with IP65/NEMA4 motors and CP.
• Process (dry air ) fans designed for 5"external static pressure.
• Rotor incorporates robust internal structure with perimeter flange for industrial quality , durability and easy serviceability.
• Rotor perimeter flange extends media and seal life
• Rotor is non flammable with organics <2%
• Edge hard face coating on rotor ensures long life and effective sealing
• Unique PTFE bonded silicone bulb seals minimize air leakages.

Easy to operate:

• Suitable for continuous operations
• Auto/Manual selector switch
• Reactivation cool down safety devices.
• Volume control dampers on both (P&A) air flow
• Universal supply fan outlets
• Provided with run time hour meter.
  

Easy to install:

• Versatile, easy to handle or maneuver and lock on wheels.
• Forklift able from all the 4 sides.
• Providing with lifting eyes for hoisting.
• Well balanced with equal load distribution of heavy components.
• Easy connection to flexible hoses or electricity supply.

Easy Maintenance:

• Quick and easy to service.
• Rotor is water washable
• Filters are washable cleanable.

Options:

• Automatic control of humidity.
• Stainless steel construction
• Round collar for air inlet
• Weaterhood for air inlets

Typical Applications:

• Temporary Drying : Water damage, Building works, paintworks.
• Storage: Dry stores, paper / wood, museum /libraries.
• Manufacturing process: Pharmaceuticals, plastics etc.
• Corrosion Prevention: Ships, Tanks, Refineries, Pipelines, Columns
• Drying Processes: Sausages and ham, dairy, food products.
  
  SPECIFICATION SHEET FOR DMJ SERIES DEHUMIDIFIER
  

  MODEL DRYMAX Jr. PROCESS AIR FLOW (CMH) REACT AIR FLOW (CMH) REACT ESP (Pa) NOISE LEVEL db POWER REQD. APPROX. WEIGHT KG. DMJ 250 S 250 50 70 220 VAC 50 HZ 17.5 DMJ 500 S 500 100 73 220 VAC 50 HZ 25

   

  DIMENSIONAL DATA AND DUCT CONNECTION
  
  

  MODEL UNIT DIMENSION DATA AIR INLET CONNECTION DRY AIR WET AIR SERVICE SPACE OUTLET CONNECTION OUTLET CONNECTION       W D H A B C D1 E F Dia G H1 I J Dia K L M N DMJ 250 S 345 340 350 45 45 240 140 170 145 100 40 90 62 72 40 350 350 DMJ 500 S 370 400 435 65 45 240 140 195 155 150 40 90 75 72 40 400 400

DryMax Junior Series Dehumidifiers

High Efficiency and Reliability

• Totally self contained portable unit
• CNC fabricated unit in Stainless Steel
• Rotor media has high performance metal silicates synthesized in situ.
• Rotor incorporates robust internal structure with stainless steel perimeter rim for industrial quality and durability.
• Edge hard face coating on rotor ensures long life
• Rotor is non flammable with organics <2%
• Heat recovery segment built with in rotor media
• Temperature - dependent semiconductor (PTC) heater ensures constant reactivation temperature and performance.

Easy to operate

• Suitable for continuous operations
• On /off , Auto/Manual selector switch
• System on status indication
• Air Volume control dampers for dry air flow
• Includes 3.5 meters of cable length.
• Round collar with birds cage for inlet and outlet.
• Includes hour meter and ammeter.

Easy to install

• Small foot prints , low weight , easy to carry .
• Easy connection to flexible hoses and electrical supply.
• Several mounting and installation options.

Easy Maintenance

• Quick and easy to service.
• Rotor is water washable

Options

• Humidity control through humidistat on /off
• Weather proof units
• Flexible hoses.
• Booster fan for long ductwork.

Typical Applications

• Temporary Drying : Water damage, Building works, paintworks.
• Storage: Dry stores, paper / wood, museum /libraries.
• Manufacturing process: Pharmaceuticals, plastics etc.
• Corrosion Prevention: Ships, Tanks, Refineries, Columns, Pipelines
• Drying Processes: Sausages and ham, dairy, food products.

DIMENSIONAL DATA AND DUCT CONNECTION

Related Equipment

Ancillary equipment including chillers, heaters, air-movers and recording devices to support the use of desiccant

Refrigeration based dehumidifiers for special application needs

Drying Chambers-stationery and portable-for containerized drying.

FFB (Fluted Flat Bed) Series Dehumidifiers


Largest capacity range in Compacts - from 170 cmh to 2000 cmh (100 cfm to 1177 cfm). The new series Bry-Air F F B, 170 cmh through 2000 cmh (100 cfm to 1177 cfm) desiccant dehumidifier line is designed to integrate "small footprint and finish" of a commercial unit with "the ruggedness" of an industrial dehumidifier.

The Bry-Air FFB Compact Dehumidifier is CNC fabricated with powder coated finish and incorporates a high performance fluted metal silicate desiccant synthesized rotor which allows for:

• Reduced Foot Print

• Increased Performance

• Lowest Volume/Weight per CMH

• Innumerable mounting options

• Light weight, and can be installed above the false ceiling eliminating the need for floor space

The F F B Compact Dehumidifier removes moisture through a process of continuous "physical adsorption". The moisture is adsorbed in the dehumidification sector by the fluted, desiccant synthesised rotor and is exhausted in the reactivation sector by a stream of hot air in a counter flow.

* Note:- Other voltage available are - 200/220/240/380/440/460 VAC, 1Ph/3Ph, 50/60 Hz