POP Drying

Short term dehumidification services for faster POP drying

Enquire Now

POP Drying

The presence of high moisture during the POP procedure delays the completion of the project. Life & quality of coating gets hampered if it is done in the presence of high moisture levels.

Generally, POP drying is left to the mercy of nature for natural drying or it is dried through a painful crude method. This crude method sometimes leads to cracks in POP and therefore damaging the whole of the walls. If the temperature is not controlled, the crude methods eg: Halogen lamps and heater destroys the aesthetic looks and reduces the POP’s life.

Also, during winters and monsoons POP takes a long time to dry out thereby delaying the overall projects. This gives major loss to the hotels and commercial buildings.

Humidity affects POP drying. During conditions where humidity is high drying of POP takes longer than usual. If painting is done on wet POP then paint peels of by forming bubbles or fish-eye.

Problems due to humidity:

  • Slow POP drying
  • Peeling of POP
  • Bubbling of POP
  • Cracking of POP

General Recommendation

Drying of POP, reduction of moisture can be done with the help of Dehumidifiers. Dehumidification is the most effective and quickest method of moisture removal. Dehumidification involves lowering the dew point of the air surrounding the POP so as the water starts to migrate from POP to the dry surrounding air. Dehumidification helps to achieve and maintain the Level of Moisture to prevent coating failure while POP coating.

A dehumidification system can help to dry the POP faster. Humid air is directed across a desiccant material of Dehumidifier that acts as a drying agent. The moist desiccant is dried using a second hot air stream that heats the desiccant and releases moisture. Then the desiccant is reused to dry more air. In a continuous process, the air is dried by the desiccant while the moist desiccant is dried for reuse so that dry air is available continuously.

TDS Solution

To provide the above parameters TDS provides a complete customized package solution of dehumidifiers, condensing units, blowers & ducts backed with skilled technical manpower to maintain the required moisture (3%-5%) and temperature level.

Benefits

  • Faster drying of POP
  • Faster completion of the projects
  • Less coat required per year and better coating performance
  • No coating related problems like coating failure and improper adherence
  • Project time and cost reduced by approx. 35%.
  • The coating can be done any time of the year irrespective of weather conditions and downtime can be planned accurately.
  • Less expensive repairs and project delays.

Application based solutions for
POP Drying

Key Installations

POP Drying, Manesar

Trident, Mumbai

Tell us what you need We’ll help you find what’s right for you

    up